Single Point Sample Conditioning Modules
| FEATURES |
|
BENEFITS |
| Modules are pre-engineered to your specifications |
|
Minimal maintenance |
| Module delivered assembled with only cooling water,sample and drain connections required for start-up |
|
Protection of instrumentation |
| List of options accommodates conditioning for any sample |
|
Ensure correct sampling conditions |
| Convenient stainless steel sink holds grab sample bottle and acts as drain |
|
|
| Handles wide range of samples,pressures and temperatures for peak performance |
|
|
| Unit is compact and lightweight |
|
|
| Variety of analyzers can be mounted directly onto unit with larger plate |
|
|
| Pressure |
|
Low Pressure:0 – 1000 psig / 70 bar;High Pressure:1000 – 5000 psig / 350 bar |
| Temperature |
|
Low Temp:0– 450°F / 232°C;High Temp:up to 1000°F / 537°C |
| Flow |
|
Up to 1500 ml/min |
| Pressure |
|
35 – 150 psig / 2.45 – 10.5 bar |
| Temperature |
|
Up to 100°F/37°C |
| Flow |
|
4–12 gpm / 15.14 – 45.43 ml/min |
Cooling water inlet/outlet
connections: |
|
from 3/8” FNPT to 3/4” FNPT |
| Backplate |
|
17“ x 27“ / 43.1 x 68.58 cm;304SS |
| Grab sample sink |
|
304SS with 1/2” FNPT drain connection |
| High pressure inlet valve |
|
1/4”OD compression type (for hot liquid) or 3/8”OD compression type (for steam). Inlet valve packing can be Teflon, PEEK or Grafoil. |
Coolant isolation and
throttling valves |
|
BNZ |
High temp thermal
shut-off valve |
|
304SS (for 0 – 3000 psi) or 316SS (for > 3000 psi) |
W6501 high pressure
reducing valve |
|
316SS |
| Temperature gauge |
|
0–200°F/93°C;316SS |
| Pressure gauge |
|
0–60 psig / 0 – 4.2 bar;316SS |
| Back pressure regulator |
|
0–50 psig / 0 – 3.5 bar;316SS |
| Analyzer flowmeter |
|
20 – 240 ml/min;acrylic and 316SS;with 1/4“ compression fitting outlet |
