|
|||||||||
|
|||||||||
 |
 |
|
|
 |
 |
 |
 |
 |
 |
 |
Total Organic Carbon (TOC) Analyzer Aqualyzer® 3001
AQUALYZER® 3001 SERIES
AQUALYZER® 3001 SERIES
The Waltron 3001 Total Organic Carbon (TOC) analyzer has been designed for the continuous and automatic measurement of total organic carbon in water. The 3001 TOC analyzer can be used for industrial and environmental monitoring. The analyzer measures Total Organic Carbon in water samples using the EPA approved method based on UV persulfate oxidation and detection of generated carbon dioxide using a non-dispersive infrared analysis. This method meets the requirements of European ISO/CEN guidelines. The analyzer meets EPA, DIN, CE, ASTM, NAMUR regulations. Common applications include:
|
  |
||
   |
|||
| FEATURES | BENEFITS | |
| Wide range analysis: 0-10 mg/l, 0-5000 mg/l (other ranges available upon request) | Low reagent and standard consumption | |
| Automatic cleaning | Minimal maintenance required | |
| Fast response (6-8 minutes depending on range) | Automatic operation | |
| Automatic calibration | ||
| Integrated air purifier (supplied by internal compressor) | ||
| Use of digital-flow controller for carrier gas | ||
| GSM option |
| Performance | ||
| Range | Wide range analysis: 0-10 mg/l, 0-5000 mg/l (other ranges available upon request) | |
| Method | TOC measurement with TIC removal by acidification and spargine, sodium persulfate UV promoted oxidation, CO2 detection by non-dispersive infrared analyzer (NDIR) |
|
| Measurement Type: | Continuous |
|
| Accuracy | ± 2% of full scale |
|
| Response Time | 6-8 minutes (depending on range) | |
| Reagents | Phosphoric acid and sodium persulfate (concentrations dependent upon on range) | |
| Carrier Gas | Air purifier integrated; supplied by an internal compressor | |
| Cleaning | Automatic | |
| Calibration | Automatic | |
| Analog Outputs | 4-20 mA (optically isolated) |
|
| Alarms | 2 SPDT contacts for measurements alarm and fault alarm; GSM option |
|
| Power Supply | 230 VAC (optional 115 VAC) | |
| Conformity | EN610004-2; EN610004-4; C 46-022; EN55022; EN61326 (EMC compatibility) | |
| Communication | RS 232 (mono-directional) standard; RS485/Modbus RTU (optional) | |
| Operating Conditions | ||
| Sample Inlet Pressure | Atmospheric | |
| Sample Temperature | 5 - 50°C | |
| Environmental Temperature | 5 - 40°C | |
| Mechanical | ||
| Dimensions | 760 x 600 x 210 mm (29.92 x 23.62 x 8.27 in) |
|
| Weight | Approximately 100 lb (45kg), depending on range | |
| Protection | IP 54 |
|
